What Filtration System Do I Need For My Home?
Are you thinking about setting up a filtration system in your home? If so, you’re probably wondering what type of filtration system would be best for your needs. There are many different types of filtration systems available today, but it is important to choose the one that works best for your particular situation and budget.
This blog post will help you understand the different kinds of home filtration systems, as well as which one might be best for your home.
Keeping Your House Water Safe
Let’s talk about whole house filters.
Whole-House Filters
Whole house filters are designed to remove dust, pollen, bacteria, chemicals, and other contaminants from all the water coming into your home. They are typically installed on the main water line and can provide protection from possible water-borne illnesses or health hazards. These systems are a great way to keep your entire family safe from toxins and pollutants in both drinking water and household water used for bathing and laundry.
If you’re looking for long term protection against microorganisms like bacteria then whole house filtration may be better suited for your needs – although they tend to cost more up front they require less maintenance in comparison with point-of-use filters over time.
Point-of-Use Filters
The next option is a point-of-use filter. These filters are typically installed directly onto faucets or shower heads in order to purify just that one source of water.
For instance, installing a filter on your kitchen faucet means only the water coming out there will be filtered through it–the rest of the house will not receive this protection. Point-of-use filters can remove smaller particles than those removed by whole house filters due to their more direct approach.
A point-of-use filter may be an effective solution if you’re just trying to reduce bad tastes or smells in certain areas of your home while avoiding contamination caused by external factors such as manufacturing pollution or agricultural runoff.
Reverse Osmosis (RO) Filtration Systems
Finally, there are reverse osmosis (RO) filtration systems, which draw contaminated liquid through a semipermeable membrane and then push it back out as pure liquid.
This kind of filtering removes extremely small particles such as nitrates, arsenic and fluoride–allowing only clean water to pass through into the storage tank beneath the sink where it can be accessed with a tap or pump faucet for drinking purposes only – not for general use throughout the house like with a whole house filter system.
If your main concern is removing heavy metals like lead or silver from within a municipal water supply, RO systems should be considered.However, these systems may use a lot of electricity and that can increase your utility bills. The cost-effectiveness may be reduced over time though they provide exceptional performance compared to other models mentioned above.
So which type of filtration system do you need? It depends on what kind of contaminants you’re trying to protect yourself from and how much money you’re willing to spend on installation and maintenance fees over time.
No matter what type of system you decide is best for your needs – make sure it’s certified by an independent third party testing organization such as NSF International so that you know it’s up to standards set forth by international regulatory agencies regarding safety & effectiveness.
Doing some research before investing in any type of filtration system can save headaches down the road!
Installation And Maintenance Costs For Each Type Of Filter
When deciding between the different types of filtration systems available for your home, it’s important to think about not only the effectiveness of each system but also the cost associated with installation and maintenance.
The initial cost of a whole house filter varies depending on the size and complexity of your home, but it can range anywhere from $500 to $5000 or more. Additionally, these filters require professional installation, which will add to the upfront cost. Maintenance costs for this type of filter typically include replacement filters every 6-12 months, which can range from $50-$100 per filter.
Point-of-use filters generally have lower startup costs in comparison with whole house filters. These systems typically run between $50-$150 and don’t require any additional installation fees. Depending on the type of filter used, replacement cartridges may need to be replaced every 3-6 months at a cost ranging from $15-$50 per cartridge.
Finally, reverse osmosis systems tend to have a much higher upfront cost than that of other filtration methods – anywhere from $200-$1000+ depending on size & complexity once again. Plus they require professional installation due to the use of pressurized storage tanks and piping components that must be connected correctly in order for them to function properly, thus adding significantly to the overall costs associated with purchasing an RO filtration system.
Maintenance costs on these units are relatively low compared with other models since semi-permeable membrane elements usually only need replacing every 1-2 years or so depending usage rates & pressure conditions – costing around $75-$200 per element (if not included in purchase price ).
By understanding the pros & cons associated with each kind of filtration system as well as their respective installation & maintenance costs , you’ll be able to make an informed decision about which kind is best suited for your specific situation & budget .
Let’s start making a difference in our world by implementing water purification methods that are less harmful to the environment. With Charlotte Water Filtration‘s services, you can get your water purification system up and running.
Get your hands on the phone and make an appointment with one of our highly trained plumbing professionals and technicians. By utilizing our water filtration and whole-house filtration system services, you can rest assured that the potability and purity of your water will never be compromised.